Other 682B05 PCB

The Model 682B05 is a 4-20mA Din Rail Signal Conditioner designed to interface with IMI Sensor’s ICP® accelerometer for bearing fault detection. Specifically, the 682B05 detects high frequency impacts related to bearing fault/lube starvation and provides a 4-20mA signal proportional to the magnitude of vibration. From the same sensor, the device also converts overall vibration to a 4-20mA signal, which is used for traditional machine diagnostics and predictive maintenance such as out of balance and misalignment. Input Signal : 100 mV/g Frequency Response(± 3 dB)(Overall Vibration) : 10 to 1k Hz Frequency Response(± 3 dB)(Fault) : 1k or 5k to 100 kHz Measurement Range(Fault Detector) : 50 g Measurement Range(Vibration) : 5/10/20 g Measurement Range(Velocity) : 0.5/1/2 in/sec Output Range : 4 to 20 Ma Sampling Time(± 15 %) : 7 sec Span(± 5 %) : 16 mA Power LED : Green Warm Up : <2 minutes Temperature Range(Operating) : 32 to 158 °F Temperature Range(Storage) : -40 to 257 °F Supply Voltage : 20 to 28 VDC Current Consumption : ≤ 150 mA Excitation Voltage(± 1 V) : 24 VDC Constant Current Excitation(± 1 mA) : 4 mA Raw Vibration Output : +/-0.01 % of Input Load Resistance : 500 Ohm Size (Width x Height x Depth) : 0.9 in x 3.9 in x 4.5 in Weight : <5 oz Housing Material : Polyamide Screw Terminal Wire Size : 24-14 AWG Electrical Connector(input/output) : Removable Screw Terminals Electrical Connector(Output, Vibration) : BNC Jack Din Rail Mount : 1.38 in